Frequency conversion assemblies of KeyLink Microwave

Click: 182Date: 2020-10-30Come from: Aimer Liu

 

In a communication system, the mixer (frequency converter) plays a key role. The mixing circuit includes three components: local oscillator, nonlinear device and band-pass filter. The purpose of mixing is to ensure that the receiver obtains higher sensitivity, sufficient amplification and appropriate passband, and can work stably at the same time. Therefore, there are some requirements for the performance of the mixer:


1. Frequency stability, especially for up-converter, must ensure the emission carrier frequency index requirements. Taking INTELSAT as an example, the specified frequency tolerance of various transmitting carriers is shown in Table 1. In order to meet the requirements in Table 1, the local oscillators in the upconverter all use crystal oscillators with high stability. First, second, local oscillator adopts frequency synthesis phase lock technology.


2. Easy to change operating frequency. In the international satellite communication system, the satellite circuit business is increasing at a speed of about 15% every year. In order to meet the needs of circuit development, the frequency of the whole system is planned to be fully adjusted once every two years, local frequency changes are more frequent. Therefore, the frequency of receiving and sending of the earth station may also change frequently. In order to meet the needs of this change, it is required that the frequency of up and down converter can be adjusted, and the step level is generally 1.25MHz, 250Hz, etc.


3. With the rapid development of digital communication, the requirements for the phase characteristics of up-down converter are higher, especially for the phase noise of frequency synthesizer. typical value of phase noise:

100Hz 60dBc/Hz

1kHz 70 dBc/Hz

10kHz 75 dBc/Hz

100kHz 85 dBc/Hz


Keylink frequency conversion components can bring stable frequency conversion output to the system. If you are interested in our products, please contact info@keylinkmw.com or 0086-18109037151 (Cel/Whatsapp).



Previous: The role of GaN front-end components in radar system
Next: Explanation of TTL and LVTTL about Keylinks RF power amplifiers
[ Print][ Close]
contact us
Add: No.2- 5, Huidu Headquarters Park,
Xixin Avenue 5, Chengdu, 611731, China 
Tel: 0086-28- 87870761
Fax: +86-28-87883266

Cel/Whatsapp: 0086-18109037151

Email: info@keylinkmw.com
Copyright(C)   Chengdu Keylink Microwave Technology Co., Ltd.   All Rights Reserved.